Copyright ©
SUPPLIES AND SERVICE CHART
COOLING SYSTEM LIQUID - LEVEL
S
S
WARNING
The plug of the cooling system has to be
unscrewed at engine shut off and cold.
Never refill with cold liquid while the engine is still
hot. The abrupt temperature change could damage
the engine components. Let the temperature inside
of the engine lower under 50 °C (122 °F) before fill-
ing the system with coolant.
If the cooling system is leaking, do not mix sealing
additives to the coolant. These could in fact clog
the cooling system. In such a case the coolant
delivery could cause a engine overheating.
The coolant level has to be checked daily, so as to
detect in time liquid leaks and to avoid damages.
Shut off the engine and wait until the engine and the
cooling system reach 50 °C (122 °F).
Open the engine compartment cover.
The coolant level must be between notches "min"
and "max" of the surge tank (1). If necessary, top up
the coolant.
To perform this operation, open with caution the cap
(2) of the surge tank of about half of a turn, to allow
the pressure to relieve from the cooling system.
Only after pressure relief you can unscrew com-
pletely the cap and top up the coolant.
Retighten the cap.
Close the engine compartment cover.
15
4-17