Case WX145 Operator's Manual page 130

Depressing button (4): selection of forward travel
direction, shown by lamp (A) on the display.
A single acoustic warning is sounded
Depressing button (5): select forward travel direc-
tion, shown by lamp (B) on the display.
If you have to work at a particularly low speed,
select the 1st speed (off-road travel) with push-but-
ton (8) and than the creep speed with push-button
(7).
A double acoustic warning is sounded.
Activate the travel pedal (9), the machine starts trav-
elling.
The display shows the selected gear and speed; the
lamps indicated the travel direction selected.
Set the speed with the travel pedal (9).
INCHING - TRAVEL SPEED ADJUSTER
The travel speed can be adjusted by using the knob
/ potentiometer (1).
By turning it to the left: travel speed is decreased.
By turning it to the right: travel speed is increased.
When travelling uphill, machine speed does not
decrease. When travelling downhill, the braking
effect of the engine is increased, so that the
machine speed does not increase. In this way, a
non-permitted increase in travel speed and danger
situations both for persons and for the machine are
prevented.
When stopping the machine on slopes (travel speed
in "0" position), the machine keeps still, even without
actuating the service brake and the automatic mode
of the parking brake.
Thanks to the closed oil circuit, as regards inner
leaks, wheel movement is prevented by blocking the
travel engine.
Copyright ©
OPERATING THE MACHINE
21
22
23
3-19