Parameters Setting - Case WX145 Operator's Manual

PARAMETERS SETTING

CLAMSHELL BUCKET
SPEED
OPENING:
CLOSING:
The opening/closing speed reduction of clamshell is
optional.
SWITCHING OVER FROM STANDARD
TO CLAMSHELL BUCKET
To switch over the working attachment from stand-
ard bucket to clamshell, two valves located on the
bucket cylinder have to be switched.
The valves have to be switched only if the pressure
has been released from the hydraulic system, other-
wise, the seals may get damaged.
STANDARD BUCKET OPERATION
Set to horizontal position the marker grooves on the
valves' squares (1).
ATTACHMENT
CLAMSHELL BUCKET
REDUCED LOAD
CARRYING CAPACITY
CLAMSHELL BUCKET
SPEED
OPENING:
CLOSING:
Copyright ©
ATTACHMENTS
Save changes?
F34185
41
42
7-23