Copyright ©
ATTACHMENTS
ROTARY CUTTER
SAFETY INSTRUCTIONS
The hazard zone of the hydraulic rotary cutter must
be kept clear of all persons.
Risks of flying rock fragments.
Therefore, stop work as soon as any persons enter
the hazard zone of the rotary cutter or the machine.
Resume the work only when bystanders have left
the working area.
Close the front window of the machine before start-
ing up the rotary cutter.
Install the protective grating.
Operate the rotary cutter from the operator's seat
only.
The power ratings of the machine and of the hydrau-
lic cutter must be coordinated.
This prevents the machine from being overloaded or
the stability from being jeopardized.
Before mounting the attachment, check that attach-
ment and machine are filled with identical or com-
patible hydraulic oil.
If this is not the case, drain the oil out of the attach-
ment.
7-25