Case WX145 Operator's Manual page 146

SLEWING POWER LIMITATION
The hydraulic slewing power of the upper structure
can be individually adapted to the working needs
and to the conditions of use of the machine.
In the working mode, depress repeatedly a arrow
button until the background of "MACHINE" (1) on
main menu is highlighted grey. Confirm with "set"
button.
Depress repeatedly an arrow button until "SLEW-
ING MOMENT" (2) is selected and confirm with but-
ton "set".
The arrows on the right side of display indicate that
other sub-menus can be recalled:
ON = slewing power limitation active. The slewing
power preset is indicated as a percentage, e.g.
40%.
OFF = slewing power limitation inactive.
The values are increased or decreased with the
arrow keys in 5% steps.
A long press of the arrow keys starts automatic
scrolling of the values.
The desired hydraulic slewing power of the upper
structure can be set with the UP and DOWN arrow
buttons. Higher values mean more power available
for slewing with a simultaneous reduction of the
hydraulic power available to other working move-
ments such as "Raising the boom" and vice versa.
The settings are shown as a bargraph display
between 30% and 100%. Confirm the setting by
depressing button "set" twice. Depressing "set" only
once and then the upward arrow button, all changes
made are rejected and the main menu returns.
DEFAULT = resets the settings depending on the
type of machine, the standard parameters are reset
to the factory-defined standard values.
Copyright ©
OPERATING THE MACHINE
MACHINE
51
52
3-35