SEAT BELT PRECAUTIONS
1
BC02N375
1. RIGHT HAND BELT STRAP
2. LATCH MECHANISM
1. Insert the metal end of the right-hand belt strap
into the latch mechanism on the left-hand side of
the seat.
2. To unlatch the seat belt, press the red button on
the left-hand side latch mechanism.
WARNING: Before starting the engine make
certain seat belts are securely fastened. The
seat belt can help insure your safety if it is
used and properly maintained. Never wear a
seat belt loosely or with slack in the belt
system. Never wear the belt in a twisted
condition or pinched between the seat
structural members.
EMERGENCY EXIT HAMMER
DC04D572
An emergency exit hammer is provided on the right
s i d e o f c a b. I n c a s e o f e m e r g e n c y, t a ke t h e
emergency hammer, break the cab glass, and
escape from the cab. In addition, the emergency
hammer is equipped with a cutter on the lever side to
cut seat belt, etc.
87722073 NA
CHAPTER 2 - SAFETY, DECALS, AND HAND SIGNALS
2
Figure 5
M422A
Figure 6
Issued 01-08 Bur
SPECIFIC PRECAUTIONS TO THIS MACHINE
•
Keep the load or tool as low as possible while
moving the machine around the job site.
•
Never smoke while refueling.
•
Do not use tractive force of the machine for
loading the bucket attachment nor to push or pull
any objects.
•
Do not use swinging force of the machine for
operations.
•
Do not perform "hammering" operation with the
bucket.
•
Do not use this machine for anything other than its
intended purpose.
•
DO NOT OPERATE bucket and arm cylinders to
stroke end repeatedly.
•
Do not over exert the machine's capacities.
•
Never pull standing objects toward the machine.
•
Do not use the long reach attachment for general
construction work at any time.
2-9