General Information - Case CX14 Operator's Manual

Your machine has been designed and built to the highest standards of quality. It conforms to all current safety
regulations. See Official documents. However, the risk of accidents can never be completely excluded. That is
why it is essential to observe elementary safety rules and precautions.
Read this manual carefully, paying particular attention to the instructions concerning safety, operation, and
maintenance so as to avoid the risk of injury while operating or servicing the machine.
The standard attachments and tools of this machine are designed to carry out all kinds of earthmoving and
rehandling operations. If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make
sure that it is designed to carry out this kind of work. For this type of application, the machine must be equipped
with safety valves, an overload indicator, a load handling chart corresponding to the type of machine and its
attachment and a load fixing point. All legal requirements must also be strictly observed.
Do not use this machine for any application or purpose other than those described in this manual. If the machine
is to be used for work involving the use of special attachments, accessories, or equipment, consult your CASE
Dealer in order to make sure that any adaptations or modifications made are in keeping with the machine’s
technical specifications and with prevailing safety requirements.
Any modification or adaptation which is not approved by the manufacturer may invalidate the machine’s initial
conformity with safety requirements.
The machine must undergo regular inspections, the frequency of which varies according to the type of use.
Consult your CASE Dealer.
Before permitting a new operator on this machine, make sure:
1. That the operator has received the necessary training on how to operate the machine correctly and
safely in one of our training centres or from an approved organization.
2. That the operator has read and understood the instructions given in this manual.
Always keep this manual in the operator’s compartment. Make sure it is always complete and in good condition.
If you wish to obtain extra copies, or copies in languages other than that of the country of use, consult your CASE
Dealer.
Your CASE Dealer is at your disposal for any further information. He will also provide any after-sales service you
may require, and genuine CASE spare parts, your guarantee of quality and match.
Materials and specifications are subject to change without notice.
II

GENERAL INFORMATION

Find manuals at https://best-manuals.com Find manuals at https://best-manuals.com