Siemens SINAMICS G120D Original Instructions Manual page 116

Setting functions
8.2 Inverter control
Jog settings
Parameter
p1058
p1059
p1082
p1110
p1111
p1113
p1120
p1121
p1055 = 722.0
p1056 = 722.1
116
Description
Jogging 1 speed setpoint (factory setting 150 rpm)
Jogging 2 speed setpoint (factory setting -150 rpm)
Maximum speed (factory setting 1500 rpm)
Inhibit negative direction
=0: Negative direction of rotation is enabled
Inhibit positive direction
=0: Positive direction of rotation is enabled
Setpoint inversion
=0: Setpoint is not inverted
Ramp-function generator ramp-up time (factory setting 10 s)
Ramp-function generator ramp-down time (factory setting 10 s)
Jog bit 0: Select jogging 1 via digital input 0
Jog bit 1: Select jogging 2 via digital input 1
=1: Negative direction of rotation is
inhibited
=1: Positive direction of rotation is
inhibited
=1: Setpoint is inverted
Converter with control units CU250D-2
Operating Instructions, 04/2014, FW V4.7, A5E34261542B AA