Ipv6 Pim Configuration Examples - HP A8800 Configuration Manual

Task
Display information about
join/prune messages to send.
Display IPv6 PIM neighboring
information.
Display IPv6 PIM routing table.
Display RP information.
Clear statistics for IPv6 PIM control
messages.

IPv6 PIM configuration examples

IPv6 PIM-DM configuration example
Network requirements
Receivers receive VOD information through multicast. The receiver groups of different organizations form
stub networks, and at least one receiver host exists in each stub network. The entire IPv6 PIM domain
operates in the dense mode.
Host A and Host C are IPv6 multicast receivers in two stub networks N1 and N2.
MLDv1 runs between Router A and N1 and between Router B/Router C and N2.
Command
display pim ipv6 join-prune mode { sm
[ flags flag-value ] | ssm } [ interface
interface-type interface-number |
neighbor ipv6-neighbor-address ] *
[ verbose ] [ | { begin | exclude | include }
regular-expression ]
display pim ipv6 neighbor [ interface
interface-type interface-number |
ipv6-neighbor-address | verbose ] * [ |
{ begin | exclude | include }
regular-expression ]
display pim ipv6 routing-table
[ ipv6-group-address [ prefix-length ] |
ipv6-source-address [ prefix-length ] |
incoming-interface [ interface-type
interface-number | register ] |
outgoing-interface { include | exclude |
match } { interface-type interface-number |
register } | mode mode-type | flags
flag-value | fsm ] * [ | { begin | exclude |
include } regular-expression ]
display pim ipv6 rp-info
[ ipv6-group-address ] [ | { begin |
exclude | include } regular-expression ]
reset pim ipv6 control-message counters
[ interface interface-type
interface-number ]
419
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.