Ipv6 Mpls L3Vpn Configuration Examples; Configuring Ipv6 Mpls L3Vpns - HP MSR2000 Configuration Manual

Task
Display outgoing labels for all BGP
VPNv6 routes (MSR4000).
Display BGP VPNv6 address
family update group information.
For more information about the display ipv6 routing-table, display bgp group vpnv6, display bgp peer
vpnv6, and display bgp update-group vpnv6 commands, see Layer 3—IP Routing Command Reference.

IPv6 MPLS L3VPN configuration examples

Configuring IPv6 MPLS L3VPNs

Network requirements
CE 1 and CE 3 belong to VPN 1. CE 2 and CE 4 belong to VPN 2.
VPN 1 uses route target attributes 1 1 1:1. VPN 2 uses route target attributes 222:2. Users of different VPNs
cannot access each other.
Run EBGP between CEs and PEs to exchange VPN routing information.
PEs use OSPF to communicate with each other and use MP-IBGP to exchange VPN routing information.
Figure 81 Network diagram
AS 65410
CE 1
GE2/1/1
Loop0
GE2/1/2
CE 2
Table 27 Interface and IP assignment
Device
CE 1
PE 1
VPN 1
GE2/1/1
Loop0
PE 1
POS2/1/0
POS2/1/0
MPLS backbone
GE2/1/1
VPN 2
AS 65420
Interface IP address
GE2/1/1 2001:1::1/96
Loop0 1.1.1.9/32
GE2/1/1 2001:1::2/96
Command
display bgp routing-table vpnv6 outlabel
[ standby slot slot-number ]
display bgp update-group vpnv6
[ ip-address ]
AS 65430
VPN 1
GE2/1/1
PE 2 GE2/1/1
POS2/1/1
POS2/1/0
GE2/1/2
P
GE2/1/1
VPN 2
AS 65440
Device
P
327
Remarks
Available in any view.
Available in any view.
CE 3
Loop0
CE 4
Interface IP address
Loop0 2.2.2.9/32
POS2/1/0 172.1.1.2/24
POS2/1/1 172.2.1.1/24