HP A8800 Configuration Manual page 371

Configuring MLD query and response parameters globally
Step
1. Enter system view.
2. Enter MLD view.
3. Configure the MLD querier's
robustness variable.
4. Configure the startup query
interval.
5. Configure the startup query
count.
Configure the MLD query
6.
interval.
7. Configure the maximum
response delay for MLD
general query messages.
8. Configure the MLD last
listener query interval.
9. Configure the MLD other
querier present interval.
Configuring MLD query and response parameters on an interface
Step
1. Enter system view.
2. Enter interface view.
3. Configure the MLD querier's
robustness variable.
4. Configure the startup query
interval.
Configure the startup query
5.
count.
6. Configure the MLD query
interval.
Command
system-view
mld
robust-count robust-value
startup-query-interval interval
startup-query-count value
timer query interval
max-response-time interval
last-listener-query-interval interval
timer other-querier-present
interval
Command
system-view
interface interface-type
interface-number
mld robust-count robust-value
mld startup-query-interval interval
mld startup-query-count value
mld timer query interval
359
Remarks
N/A
N/A
2 times by default.
By default, the startup query
interval is 1/4 of the "MLD query
interval."
By default, the startup query count
is set to the MLD querier's
robustness variable.
125 seconds by default.
10 seconds by default.
1 second by default.
By default, the other querier
present interval is determined by
the formula "Other querier present
interval (in seconds) = [ MLD query
interval ] × [ MLD querier's
robustness variable ] + [ maximum
response delay for MLD general
query ] /2."
Remarks
N/A
N/A
2 times by default.
By default, the startup query
interval is 1/4 of the "MLD query
interval."
By default, the startup query count
is set to the MLD querier's
robustness variable.
125 seconds by default.