Task
Display IPv6 PIM information on
an interface.
Display IPv6 PIM neighbor
information.
Display IPv6 PIM routing entries.
Display RP information in the IPv6
PIM-SM domain.
Display statistics for IPv6 PIM
packets.
Display remote end information
maintained by IPv6 PIM for IPv6
ADVPN tunnel interfaces.
IPv6 PIM configuration examples
IPv6 PIM-DM configuration example
Network requirements
As shown in
•
OSPFv3 runs on the network.
•
VOD streams are sent to receiver hosts in multicast. The receiver groups of different
organizations form stub networks, and a minimum of one receiver host exists on each stub
network. The entire IPv6 PIM domain is operating in the dense mode.
•
Host A and Host C are IPv6 multicast receivers on two stub networks N1 and N2.
•
MLDv1 runs between Router A and N1 and between Router B, Router C, and N2.
Figure
94:
Command
display ipv6 pim [ vpn-instance vpn-instance-name ] interface
[ interface-type interface-number ] [ verbose ]
display ipv6 pim [ vpn-instance vpn-instance-name ] neighbor
[ ipv6-neighbor-address | interface interface-type interface-number |
verbose ] *
display ipv6 pim [ vpn-instance vpn-instance-name ] routing-table
[ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | flags flag-value | fsm | incoming-interface
interface-type interface-number | mode mode-type |
outgoing-interface { exclude | include | match } interface-type
interface-number ] *
display ipv6 pim [ vpn-instance vpn-instance-name ] rp-info
[ ipv6-group-address ]
display ipv6 pim statistics
display ipv6 pim [ vpn-instance vpn-instance-name ] nbma-link
[ interface { interface-type interface-number } ]
305