HP A8800 Configuration Manual page 184

[RouterB-Pos5/1/1] multicast boundary 239.0.0.0 8
[RouterB-Pos5/1/1] quit
[RouterB] interface pos 5/1/2
[RouterB-Pos5/1/2] multicast boundary 239.0.0.0 8
[RouterB-Pos5/1/2] quit
# On Router C, configure POS 5/1/1 and POS 5/1/2 as the boundary of admin-scoped zone 2.
<RouterC> system-view
[RouterC] interface Pos 5/1/1
[RouterC-Pos5/1/1] multicast boundary 239.0.0.0 8
[RouterC-Pos5/1/1] quit
[RouterC] interface Pos 5/1/2
[RouterC-Pos5/1/2] multicast boundary 239.0.0.0 8
[RouterC-Pos5/1/2] quit
# On Router D, configure POS 5/1/1 as the boundary of admin-scoped zone 2.
<RouterD> system-view
[RouterD] interface Pos 5/1/1
[RouterD-Pos5/1/1] multicast boundary 239.0.0.0 8
[RouterD-Pos5/1/1] quit
5. Configure C-BSRs and C-RPs:
# On Router B, configure the service scope of RP advertisements and configure Serial 4/1/9/1:0
as a C-BSR and C-RP of admin-scoped zone 1.
[RouterB] acl number 2001
[RouterB-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[RouterB-acl-basic-2001] quit
[RouterB] pim
[RouterB-pim] c-bsr group 239.0.0.0 8
[RouterB-pim] c-bsr serial 4/1/9/1:0
[RouterB-pim] c-rp serial 4/1/9/1:0 group-policy 2001
[RouterB-pim] quit
# On Router D, configure the service scope of RP advertisements and configure Serial 4/1/9/1:0
as a C-BSR and C-RP of admin-scoped zone 2.
[RouterD] acl number 2001
[RouterD-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[RouterD-acl-basic-2001] quit
[RouterD] pim
[RouterD-pim] c-bsr group 239.0.0.0 8
[RouterD-pim] c-bsr serial 4/1/9/1:0
[RouterD-pim] c-rp serial 4/1/9/1:0 group-policy 2001
[RouterD-pim] quit
# On Router F, configure Serial 4/1/9/1:0 as a C-BSR and C-RP in the global-scoped zone.
<RouterF> system-view
[RouterF] pim
[RouterF-pim] c-bsr global
[RouterF-pim] c-bsr serial 4/1/9/1:0
[RouterF-pim] c-rp serial 4/1/9/1:0
[RouterF-pim] quit
172