HP A8800 Configuration Manual page 113

Task
Display the information of
IGMP proxying groups.
Display information in the
IGMP routing table.
Display IGMP SSM mappings.
Display the multicast group
information created from
IGMPv1 and IGMPv2 reports
based on the configured IGMP
SSM mappings.
Display information about the
hosts that join the group based
on IGMP SSM mappings on an
interface.
Remove all the dynamic IGMP
group entries of a specified
IGMP group or all IGMP
groups.
Remove all the dynamic Layer 2
port entries of a specified IGMP
group or all IGMP groups.
Clear IGMP SSM mappings.
Command
display igmp [ all-instance | vpn-instance
vpn-instance-name ] proxying group
[ group-address ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
display igmp [ all-instance | vpn-instance
vpn-instance-name ] routing-table
[ source-address [ mask { mask |
mask-length } ] | group-address [ mask { mask
| mask-length } ] | flags { act | suc } ] * [ |
{ begin | exclude | include }
regular-expression ]
display igmp [ all-instance | vpn-instance
vpn-instance-name ] ssm-mapping
group-address [ | { begin | exclude | include }
regular-expression ]
display igmp [ all-instance | vpn-instance
vpn-instance-name ] ssm-mapping group
[ group-address | interface interface-type
interface-number ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
display igmp ssm-mapping host interface
interface-type interface-number group
group-address source source-address [ |
{ begin | exclude | include }
regular-expression ]
reset igmp [ all-instance | vpn-instance
vpn-instance-name ] group { all | interface
interface-type interface-number { all |
group-address [ mask { mask | mask-length } ]
[ source-address [ mask { mask |
mask-length } ] ] } }
reset igmp group port-info { all |
group-address } [ vlan vlan-id ]
reset igmp [ all-instance | vpn-instance
vpn-instance-name ] ssm-mapping group { all |
interface interface-type interface-number { all |
group-address [ mask { mask | mask-length } ]
[ source-address [ mask { mask |
mask-length } ] ] } }
101
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.
This command cannot
remove static IGMP group
entries.
Available in user view.
This command cannot
remove the static Layer 2
port entries of IGMP
groups.
Available in user view.