Enabling The Mld Snooping Host Tracking Function - HP A8800 Configuration Manual

Enabling IPv6 multicast group replacement on a port
Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view or
enter port group view.
3. Enable IPv6 multicast group
replacement.

Enabling the MLD snooping host tracking function

With the MLD snooping host tracking function, the router can record the information of the member hosts
that are receiving IPv6 multicast traffic, including the host IPv6 address, running duration, and timeout
time. You can monitor and manage the member hosts according to the recorded information.
Enabling the MLD snooping host tracking function globally
Step
1. Enter system view.
2. Enter MLD snooping view.
3. Enable the MLD snooping host
tracking function globally.
Enabling the MLD snooping host tracking function in a VLAN
Step
1. Enter system view.
2. Enter VLAN view.
3. Enable the MLD snooping host
tracking function in the VLAN.
Displaying and maintaining MLD snooping
Command
system-view
•
Enter Layer 2 Ethernet interface
view or Layer 2 aggregate
interface view:
interface interface-type
interface-number
•
Enter port group view:
port-group manual
port-group-name
mld-snooping overflow-replace
[ vlan vlan-list ]
Command
system-view
mld-snooping
host-tracking
Command
system-view
vlan vlan-id
mld-snooping host-tracking
305
Remarks
N/A
Use either command.
Disabled by default.
Remarks
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
Disabled by default.