HP A8800 Configuration Manual page 180

SPT. Routers on the RPT path (Router A and Router E) have a (*, G) entry, while routers on the SPT path
(Router A and Router D) have an (S, G) entry. To view the PIM routing table information on a router, use
the display pim routing-table command. For example:
# Display the PIM routing table information on Router A.
[RouterA] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: WC
UpTime: 00:13:46
Upstream interface: Pos5/1/1
Upstream neighbor: 192.168.9.2
RPF prime neighbor: 192.168.9.2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet3/1/1
Protocol: igmp, UpTime: 00:13:46, Expires: 00:03:06
(10.110.5.100, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: SPT ACT
UpTime: 00:00:42
Upstream interface: Serial4/1/9/1:0
Upstream neighbor: 192.168.1.2
RPF prime neighbor: 192.168.1.2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet3/1/1
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:03:06
# Display the PIM routing table information on Router D.
[RouterD] display pim routing-table
VPN-Instance: public net
Total 0 (*, G) entry; 1 (S, G) entry
(10.110.5.100, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:00:42
Upstream interface: GigabitEthernet3/1/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Pos5/1/1
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:02:26
168