Protocols And Standards - HP A8800 Configuration Manual

IGMP message
Leave

Protocols and standards

RFC 4541, Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener
Discovery (MLD) Snooping Switches
IGMP snooping configuration task list
Task
Configuring basic IGMP
snooping functions
Configuring IGMP snooping
port functions
Configuring IGMP snooping
querier
Configuring IGMP snooping
proxying
Configuring IGMP snooping
policies
For the configuration tasks in this section:
The configurations made in IGMP snooping view are effective for all VLANs. The configurations
•
made in VLAN view are effective for only the current VLAN. For a given VLAN, a configuration
Actions
In response to an IGMP leave message for a multicast group, the proxy sends a
group-specific query out of the receiving port. After making sure that no member
port is contained in the forwarding entry for the multicast group, the proxy sends
a leave message to the group out of all router ports.
Enabling IGMP snooping
Specifying the version of IGMP snooping
Configuring the maximum number of global IGMP
forwarding entries
Setting aging timers for dynamic ports
Configuring static ports
Configuring a port as a simulated member host
Enabling fast-leave processing
Disabling a port from becoming a dynamic router port
Enabling IGMP snooping querier
Configuring parameters for IGMP queries and responses
Configuring source IP address for IGMP queries
Enabling IGMP snooping proxying
Configuring the source IP address for the IGMP
messages sent by the proxy
Configuring a multicast group filter
Enabling dropping unknown multicast data
Enabling IGMP report suppression
Setting the maximum number of multicast groups that a
port can join
Enabling multicast group replacement
Enabling the IGMP snooping host tracking function
19
Remarks
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.