HP A8800 Configuration Manual page 274

Configuration procedure
1. Configure PE 1:
# Configure a Router ID, enable IP multicast routing on the public network, configure an MPLS
label switching router (LSR) ID, and enable the Label Distribution Protocol (LDP) capability.
<PE1> system-view
[PE1] router id 1.1.1.1
[PE1] multicast routing-enable
[PE1] mpls lsr-id 1.1.1.1
[PE1] mpls
[PE1-mpls] quit
[PE1] mpls ldp
[PE1-mpls-ldp] quit
# Create VPN instance a, configure an RD and route target attributes for it.
[PE1] ip vpn-instance a
[PE1-vpn-instance-a] route-distinguisher 100:1
[PE1-vpn-instance-a] vpn-target 100:1 export-extcommunity
[PE1-vpn-instance-a] vpn-target 100:1 import-extcommunity
# Enable IP multicast routing in VPN instance a, configure a share-group address, associate an
MTI with the VPN instance, and define the address range of the switch-group-pool.
[PE1-vpn-instance-a] multicast routing-enable
[PE1-vpn-instance-a] multicast-domain share-group 239.1.1.1 binding mtunnel 0
[PE1-vpn-instance-a] multicast-domain switch-group-pool 225.2.2.0 28
[PE1-vpn-instance-a] quit
# Assign an IP address, enable PIM-SM and LDP capability on the public network interface
GigabitEthernet 2/1/1.
[PE1] interface GigabitEthernet 2/1/1
[PE1-GigabitEthernet2/1/1] ip address 192.168.6.1 24
[PE1-GigabitEthernet2/1/1] pim sm
[PE1-GigabitEthernet2/1/1] mpls
[PE1-GigabitEthernet2/1/1] mpls ldp
[PE1-GigabitEthernet2/1/1] quit
# Bind GigabitEthernet 2/1/2 to VPN instance a, configure an IP address and enable IGMP and
PIM-SM on the interface.
[PE1] interface GigabitEthernet 2/1/2
[PE1-GigabitEthernet2/1/2] ip binding vpn-instance a
[PE1-GigabitEthernet2/1/2] ip address 10.110.1.1 24
[PE1-GigabitEthernet2/1/2] igmp enable
[PE1-GigabitEthernet2/1/2] pim sm
[PE1-GigabitEthernet2/1/2] quit
# Bind GigabitEthernet 2/1/3 to VPN instance a, configure an IP address and enable PIM-SM on
the interface.
[PE1] interface GigabitEthernet 2/1/3
[PE1-GigabitEthernet2/1/3] ip binding vpn-instance a
[PE1-GigabitEthernet2/1/3] ip address 10.110.2.1 24
[PE1-GigabitEthernet2/1/3] pim sm
[PE1-GigabitEthernet2/1/3] quit
262