Msdp Configuration Examples - HP A8800 Configuration Manual

MSDP configuration examples

PIM-SM Inter-domain multicast configuration
Network requirements
The network has two ASs: AS 100 and AS 200. OSPF is running within each AS, and BGP is running
between the two ASs.
PIM-SM 1 belongs to AS 100, while PIM-SM 2 and PIM-SM 3 belong to AS 200. Each PIM-SM domain
has at least one multicast source or receiver.
Configure Loopback 0 as the C-BSR and C-RP of the related PIM-SM domain on Router B, Router C, and
Router E.
Set up MSDP peering relationships between the RPs of the PIM-SM domains to share multicast source
information among the PIM-SM domains.
Figure 59 Network diagram
Table 14 shows the interface and IP address assignment, and network topology scheme.
Table 14 Interface and IP address assignment
Device
Router A
Router A
Router A
Router B
Router B
Interface IP address
GE3/1/1 10.110.1.2/24
GE3/1/2 10.110.2.1/24
GE3/1/3 10.110.3.1/24
GE3/1/1 10.110.1.1/24
POS5/1/1 192.168.1.1/24
Device
Router D
Router D
Router E
Router E
Router E
201
Interface IP address
GE3/1/1 10.110.4.2/24
GE3/1/2 10.110.5.1/24
GE3/1/1 10.110.6.1/24
S4/1/9/1:0 192.168.3.2/24
Loop0 3.3.3.3/32