HP A8800 Configuration Manual page 480
Ip multicast
Hide thumbs
Also See for A8800:
- Installation manual (121 pages) ,
- Command reference manual (153 pages) ,
- Fundamentals command reference (193 pages)
Table of Contents
Advertisement
[RouterC] interface serial 4/1/9/1:2
[RouterC-Serial4/1/9/1:2] pim ipv6 sm
[RouterC-Serial4/1/9/1:2] quit
[RouterC] interface GigabitEthernet 3/1/1
[RouterC-GigabitEthernet3/1/1] pim ipv6 sm
[RouterC-GigabitEthernet3/1/1] mld enable
[RouterC-GigabitEthernet3/1/1] quit
# Configure an IPv6 PIM domain border on Router A.
[RouterA] interface POS 5/1/1
[RouterA-Pos5/1/1] pim ipv6 bsr-boundary
[RouterA-Pos5/1/1] quit
# Configure an IPv6 PIM domain border on Router B.
[RouterB] interface POS 5/1/1
[RouterB-Pos5/1/1] pim ipv6 bsr-boundary
[RouterB-Pos5/1/1] quit
4.
Enable the imbedded RP function:
# Configure the imbedded RP function on Router A.
[RouterA] pim ipv6
[RouterA-pim6] embedded-rp
[RouterA-pim6] quit
# Configure Router B, Router C, and Router D in the same way. (Details not shown.)
5.
Configure BGP, and specify the IPv6 MBGP peer:
# On Router A, configure the IPv6 MBGP peer.
[RouterA] bgp 100
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] ipv6-family
[RouterA-bgp-af-ipv6] peer 1001::2 as-number 200
[RouterA-bgp-af-ipv6] import-route direct
[RouterA-bgp-af-ipv6] quit
[RouterA-bgp] ipv6-family multicast
[RouterA-bgp-af-ipv6-mul] peer 1001::2 enable
[RouterA-bgp-af-ipv6-mul] import-route direct
[RouterA-bgp-af-ipv6-mul] quit
[RouterA-bgp] quit
# On Router B, configure the IPv6 MBGP peers and redistribute OSPF routes.
[RouterB] bgp 200
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] ipv6-family
[RouterB-bgp-af-ipv6] peer 1001::1 as-number 100
[RouterB-bgp-af-ipv6] import-route ospfv3 1
[RouterB-bgp-af-ipv6] quit
[RouterB-bgp] ipv6-family multicast
[RouterB-bgp-af-ipv6-mul] peer 1001::1 enable
[RouterB-bgp-af-ipv6-mul] import-route ospfv3 1
[RouterB-bgp-af-ipv6-mul] quit
[RouterB-bgp] quit
468
Advertisement
Table of Contents
Troubleshooting
