HP A8800 Configuration Manual page 327

# Create VLAN 100, assign ports GigabitEthernet 3/1/1 through GigabitEthernet 3/1/4 to this
VLAN, and enable MLD snooping and MLD snooping proxying in the VLAN.
[RouterB] vlan 100
[RouterB-vlan100] port GigabitEthernet 3/1/1 to GigabitEthernet 3/1/4
[RouterB-vlan100] mld-snooping enable
[RouterB-vlan100] mld-snooping proxying enable
[RouterB-vlan100] quit
Verify the configuration
After the configuration is completed, Host A and Host B send MLD join messages addressed to group
FF1E::101. When receiving the messages, Router B sends a join message for the group out of
GigabitEthernet 3/1/1 (a router port) to Router A. Use the display mld-snooping group command and
the display mld group command to display information about MLD snooping multicast groups and MLD
multicast groups. For example:
# Display information about MLD snooping multicast groups on Router B.
[RouterB] display mld-snooping group
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port(s).
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::101
(::, FF1E::101):
MAC group(s):
MAC group address:3333-0000-0101
# Display information about MLD multicast groups on Router A.
[RouterA] display mld group
Total 1 MLD Group(s).
Interface group report information
GigabitEthernet3/1/1(2001::1):
Total 1 MLD Group reported
Group Address: FF1E::1
Last Reporter: FE80::2FF:FFFF:FE00:1
Uptime: 00:00:03
Expires: 00:04:17
GE3/1/1
Host port(s):total 2 port(s).
GE3/1/3
GE3/1/4
Host port(s):total 2 port(s).
GE3/1/3
GE3/1/4
(D) ( 00:01:23 )
(D)
(D)
315