Resetting Mbgp Connections - HP A8800 Configuration Manual

Resetting MBGP connections

Task
Reset specified MBGP
connections.
Clearing MBGP information
Task
Clear dampened routing
information and release
suppressed routes.
Clear MBGP route flap statistics.
MBGP configuration example
Network requirements
As shown in
PIM-SM 1 is in AS 100 and PIM-SM 2 is in AS 200. OSPF is the IGP in the two ASs, and MBGP runs
between the two ASs to exchange multicast route information. The multicast source belongs to PIM-SM 1,
and the receiver belongs to PIM-SM 2. Configure the respective Loopback 0 of Router A and Router B as
the C-BSR and C-RP of the respective PIM-SM domains.
Set up an MSDP peer relationship between Router A and Router B through MBGP.
Figure 63:
Command
reset bgp ipv4 multicast { all |
as-number | ip-address | group
group-name | external | internal }
Command
reset bgp ipv4 multicast
dampening [ ip-address [ mask |
mask-length ] ]
reset bgp ipv4 multicast flap-info
[ regexp as-path-regexp |
as-path-acl as-path-acl-number |
ip-address [ mask | mask-length ] ]
236
Remarks
Available in user view.
Remarks
Available in user view.
Available in user view.