HP A8800 Configuration Manual page 361

Figure 95 Format of MLDv2 query message
Table 22 Description on fields in an MLDv2 query message
Field
Type = 130
Code
Checksum
Maximum Response Delay
Reserved
Multicast Address
S
QRV
QQIC
Description
Message type. For a query message, this field is set to 130.
Initialized to zero.
Standard IPv6 checksum.
Maximum response delay allowed before a host sends a report message.
Reserved field and initialized to zero.
•
This field is set to 0 in a general query message.
•
It is set to a specific IPv6 multicast address in a
multicast-address-specific query message or
multicast-address-and-source-specific query message.
Flag indicating whether a router updates the timer for suppression after
receiving a query message.
Querier's Robustness Variable.
Querier's Query Interval Code.
349