HP A8800 Configuration Manual page 178

[RouterD-pim] quit
# On Router E, configure the service scope of RP advertisements, specify a C-BSR and a C-RP, and
set the hash mask length to 32 and the priority of the C-BSR to 20. .
<RouterE> system-view
[RouterE] acl number 2005
[RouterE-acl-basic-2005] rule permit source 225.1.1.0 0.0.0.255
[RouterE-acl-basic-2005] quit
[RouterE] pim
[RouterE-pim] c-bsr POS 5/1/3 32 20
[RouterE-pim] c-rp POS 5/1/3 group-policy 2005
[RouterE-pim] quit
Verify the configuration
# Verify the PIM configuration information on Router A.
[RouterA] display pim interface
VPN-Instance: public net
Interface
GE3/1/1
Ser4/1/9/1:0
Pos5/1/1
To view the BSR election information and the locally configured C-RP information in effect on a router, use
the display pim bsr-info command. For example:
# Display the BSR information and the locally configured C-RP information in effect on Router A.
[RouterA] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 192.168.9.2
Priority: 20
hash mask length: 32
State: Accept Preferred
Scope: Not scoped
Uptime: 00:40:40
Expires: 00:01:42
# Display the BSR information and the locally configured C-RP information in effect on Router D.
[RouterD] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 192.168.9.2
Priority: 20
hash mask length: 32
State: Accept Preferred
Scope: Not scoped
Uptime: 00:05:26
Expires: 00:01:45
Candidate BSR Address: 192.168.4.2
Priority: 10
hash mask length: 32
State: Candidate
Scope: Not scoped
NbrCnt HelloInt DR-Pri
0 30 1
1 30 1
1 30 1
166
DR-Address
10.110.1.1 (local)
192.168.1.2
192.168.9.2