Configuring Ipv6 Pim-Sm - HP A8800 Configuration Manual

Step
1. Enter system view.
2. Enter interface view.
3. Configure graft retry period.
For more information about the configuration of other timers in IPv6 PIM-DM, see
common timers."

Configuring IPv6 PIM-SM

IPv6 PIM-SM configuration task list
Task
Enabling IPv6 PIM-SM
Configuring an RP
Configuring a BSR
Configuring IPv6 administrative scoping
Configuring IPv6 multicast source registration
Configuring SPT switchover
Configuring IPv6 PIM common features
Configuration prerequisites
Before configuring IPv6 PIM-SM, complete the following task:
Enable IPv6 forwarding and configure any IPv6 unicast routing protocol so that all devices in the
•
domain are interoperable at the network layer.
Determine the IP address of a static RP and the ACL that defines the range of IPv6 multicast groups
•
to be served by the static RP.
Command
system-view
interface interface-type
interface-number
pim ipv6 timer graft-retry interval
Configuring a static RP
Configuring a C-RP
Enabling embedded RP
Configuring C-RP timers globally
Configuring a C-BSR
Configuring an IPv6 PIM domain border
Configuring C-BSR parameters globally
Configuring C-BSR timers
Disabling BSM semantic fragmentation
392
Remarks
N/A
N/A
Optional.
3 seconds by default.
"Configuring IPv6 PIM
Remarks
Required.
Use at least one approach. In an
IPv6 network only with a static RP,
skip the task of configuring a BSR.
Optional.
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.