HP A8800 Configuration Manual page 218

Configure Loopback 0 as the C-BSR and C-RP of the related PIM-SM domain on Router A, Router D and
Router G.
According to the RPF principle, the routers can receive SA messages that pass the filtering policy from its
static RPF peers. To share multicast source information among PIM-SM domains without changing the
unicast topology structure, configure MSDP peering relationships for the RPs of the PIM-SM domains and
configure static RPF peering relationships for the MSDP peers to share multicast source information
among the PIM-SM domains.
Figure 60 Network diagram
AS 100
Receiver
Loop0
GE3/1/2
GE3/1/1
Router A
GE3/1/2
Router B
Source 1
PIM-SM 1
BGP peers
Table 15 shows the interface and IP address assignment, and network topology scheme.
Table 15 Interface and IP address assignment
Device Interface
Source 1 —
Source 2 —
Router A GE3/1/1
Router A GE3/1/2
Router A Loop0
Router B GE3/1/1
Router B GE3/1/2
Router B POS5/1/1
Router C GE3/1/1
Router C GE3/1/2
Router C S2/1/9/1:0
AS 200
Router C
POS5/1/1 POS5/1/1
IP address
192.168.1.100/24
192.168.3.100/24
10.110.1.1/24
10.110.2.1/24
1.1.1.1/32
10.110.1.2/24
192.168.1.1/24
10.110.3.1/24
10.110.2.2/24
192.168.2.1/24
10.110.4.1/24
206
PIM-SM 3
GE3/1/1 GE3/1/1
Router F
Receiver
PIM-SM 2
Router D
GE3/1/1 GE3/1/1
Loop0
Source 2
Device Interface
Router D GE3/1/1
Router D POS5/1/1
Router D Loop0
Router E GE3/1/1
Router E GE3/1/2
Router F GE3/1/1
Router F S2/1/9/1:0
Router G GE3/1/1
Router G GE3/1/2
Router G Loop0
Router G —
Router G
Loop0
Router E
IP address
10.110.5.1/24
10.110.3.2/24
2.2.2.2/32
10.110.5.2/24
192.168.3.1/24
10.110.6.1/24
10.110.4.2/24
10.110.6.2/24
192.168.4.1/24
3.3.3.3/32
—