HP A8800 Configuration Manual page 214

Device
Router B
Router C
Router C
Router C
Router C
Configuration procedure
1. Assign an IP address and subnet mask to each interface as per
2. Configure OSPF for interconnection between routers in each AS. Ensure the network-layer
interoperation in each AS, and ensure the dynamic update of routing information between the
routers through a unicast routing protocol. (Details not shown.)
3. Enable IP multicast routing, enable PIM-SM and IGMP, and configure a PIM-SM domain border:
# Enable IP multicast routing on Router A, enable PIM-SM on each interface, and enable IGMP on
the host-side interface GigabitEthernet 3/1/3.
<RouterA> system-view
[RouterA] multicast routing-enable
[RouterA] interface GigabitEthernet 3/1/1
[RouterA-GigabitEthernet3/1/1] pim sm
[RouterA-GigabitEthernet3/1/1] quit
[RouterA] interface GigabitEthernet 3/1/2
[RouterA-GigabitEthernet3/1/2] pim sm
[RouterA-GigabitEthernet3/1/2] quit
[RouterA] interface GigabitEthernet 3/1/3
[RouterA-GigabitEthernet3/1/3] igmp enable
[RouterA-GigabitEthernet3/1/3] pim sm
[RouterA-GigabitEthernet3/1/3] quit
# Enable IP multicast routing, enable PIM-SM and IGMP on Router B, Router C, Router D, Router E,
and Router F in the same way. (Details not shown.)
# Configure a PIM domain border on Router B.
[RouterB] interface pos 5/1/1
[RouterB-Pos5/1/1] pim sm
[RouterB-Pos5/1/1] pim bsr-boundary
[RouterB-Pos5/1/1] quit
# Configure PIM domain borders on Router C and Router E in the same way. (Details not shown.)
4. Configure the position of C-BSR and C-RP:
# Configure Loopback 0 as a C-BSR and a C-RP on Router B.
[RouterB] interface loopback 0
[RouterB-LoopBack0] ip address 1.1.1.1 255.255.255.255
[RouterB-LoopBack0] pim sm
[RouterB-LoopBack0] quit
[RouterB] pim
[RouterB-pim] c-bsr loopback 0
[RouterB-pim] c-rp loopback 0
Interface IP address
Loop0 1.1.1.1/32
GE3/1/1 10.110.4.1/24
S4/1/9/1:0 192.168.3.1/24
POS5/1/1 192.168.1.2/24
Loop0 2.2.2.2/32
Device
Router F
Router F
Source 1
Source 2
—
202
Interface IP address
GE3/1/1 10.110.6.2/24
GE3/1/2 10.110.7.1/24
— 10.110.2.100/24
— 10.110.5.100/24
— —
Figure 59. (Details not shown.)