HP A8800 Configuration Manual page 322

[RouterA-GigabitEthernet3/1/1] mld enable
[RouterA-GigabitEthernet3/1/1] pim ipv6 dm
[RouterA-GigabitEthernet3/1/1] quit
[RouterA] interface GigabitEthernet 3/1/2
[RouterA-GigabitEthernet3/1/2] pim ipv6 dm
[RouterA-GigabitEthernet3/1/2] quit
3. Configure Router B:
# Enable MLD snooping globally.
<RouterB> system-view
[RouterB] mld-snooping
[RouterB-mld-snooping] quit
# Create VLAN 100, assign GigabitEthernet 3/1/1 through GigabitEthernet 3/1/3 to this VLAN,
and enable MLD snooping in the VLAN.
[RouterB] vlan 100
[RouterB-vlan100] port GigabitEthernet 3/1/1 to GigabitEthernet 3/1/3
[RouterB-vlan100] mld-snooping enable
[RouterB-vlan100] quit
# Configure GigabitEthernet 3/1/3 to be a static router port.
[RouterB] interface GigabitEthernet 3/1/3
[RouterB-GigabitEthernet3/1/3] mld-snooping static-router-port vlan 100
[RouterB-GigabitEthernet3/1/3] quit
4. Configure Router C:
# Enable MLD snooping globally.
<RouterC> system-view
[RouterC] mld-snooping
[RouterC-mld-snooping] quit
# Create VLAN 100, assign GigabitEthernet 3/1/1 and GigabitEthernet 3/1/2 to this VLAN,
and enable MLD snooping in the VLAN.
[RouterC] vlan 100
[RouterC-vlan100] port GigabitEthernet 3/1/1 GigabitEthernet 3/1/2
[RouterC-vlan100] mld-snooping enable
[RouterC-vlan100] quit
5. Configure Router D:
# Enable MLD snooping globally.
<RouterD> system-view
[RouterD] mld-snooping
[RouterD-mld-snooping] quit
# Create VLAN 100, assign GigabitEthernet 3/1/1 through GigabitEthernet 3/1/5 to this VLAN,
and enable MLD snooping in the VLAN.
[RouterD] vlan 100
[RouterD-vlan100] port GigabitEthernet 3/1/1 to GigabitEthernet 3/1/5
[RouterD-vlan100] mld-snooping enable
[RouterD-vlan100] quit
# Configure GigabitEthernet 3/1/3 and GigabitEthernet 3/1/5 as static member ports for IPv6
multicast group FF1E::101.
[RouterD] interface GigabitEthernet 2/1/3
310