Ipv6 Pim-Ssm Configuration Example - HP A8800 Configuration Manual

2: GigabitEthernet3/1/5

IPv6 PIM-SSM configuration example

Network requirements
Receivers receive VOD information through multicast. The receiver groups of different organizations form
stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM domain
operates in the SSM mode.
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
Router E connects to Router A, Router B, Router C and Router D.
The SSM group range is FF3E::/64.
MLDv2 runs between Router A and N1 and between Router B/Router C and N2.
Figure 119 Network diagram
Table 31 shows the interface and IPv6 address assignment, and network topology scheme.
Table 31 Interface and IPv6 address assignment
Device
Router A
Router A
Router A
Router B
Protocol: pim-sm, UpTime: 00:00:34, Expires: 00:02:56
Interface
GigabitEthernet 3/1/1
Serial 4/1/9/1:0
POS 5/1/1
GigabitEthernet 3/1/1
445
IP address
1001::1/64
1002::1/64
1003::1/64
2001::1/64