Mld Snooping Configuration Task List - HP A8800 Configuration Manual

MLD snooping configuration task list

Task
Configuring MLD snooping
basic functions
Configuring MLD snooping port
functions
Configuring MLD snooping
querier
Configuring MLD snooping
proxying
Configuring an MLD snooping
policy
For the configuration tasks in this section:
The configurations made in MLD snooping view are effective on all VLANs. The configurations
•
made in VLAN view are effective on only the current VLAN. For a given VLAN, a configuration
made in MLD snooping view is effective only if the same configuration is not made in VLAN view.
The configurations made in MLD snooping view are effective on all ports. The configurations made
•
in Layer 2 Ethernet interface view are effective on only the current port. The configurations made in
Layer 2 aggregate interface view are effective on only the current interface. The configurations
made in port group view are effective on only the ports in the current port group. For a given port,
a configuration made in MLD snooping view is effective only if you do not configure the same
configuration in Layer 2 Ethernet interface view, Layer 2 aggregate interface view, or port group
view.
The configurations made on a Layer 2 aggregate interface do not interfere with configurations
•
made on its member ports; nor do they take part in aggregation calculations. The configurations
made on a member port of the aggregate group will take effect after the port leaves the aggregate
group.
Enabling MLD snooping
Specifying the version of MLD snooping
Setting the maximum number of MLD snooping forwarding
entries
Configuring aging timers for dynamic ports
Configuring static ports
Configuring a port as a simulated member host
Enabling fast-leave processing
Disabling a port from becoming a dynamic router port
Enabling MLD snooping querier
Configuring MLD queries and responses
Configuring the source IPv6 addresses for MLD queries
Enabling MLD snooping proxying
Configuring the source IPv6 address for the MLD messages
sent by the proxy
Configuring an IPv6 multicast group filter
Enabling dropping unknown IPv6 multicast data
Enabling MLD report suppression
Setting the maximum number of multicast groups that a
port can join
Enabling IPv6 multicast group replacement
Enabling the MLD snooping host tracking function
292
Remarks
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.