Configuring Ipv6 Bidir-Pim - HP A8800 Configuration Manual

Step
3. Configure the SPT switchover.

Configuring IPv6 BIDIR-PIM

IPv6 BIDIR-PIM configuration task list
Task
Enabling IPv6 PIM-SM
Enabling IPv6 BIDIR-PIM
Configuring an RP
Configuring a BSR
Configuring IPv6 administrative scoping
Configuring IPv6 PIM common features
Configuration prerequisites
Before configuring IPv6 BIDIR-PIM, complete the following task:
Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices in the
•
domain can communicate with each other at Layer 3.
Command
spt-switch-threshold infinity
[ group-policy acl6-number [ order
order-value ] ]
Configuring a static RP
Configuring a C-RP
Enabling embedded RP
Configuring C-RP timers globally
Configuring a C-BSR
Configuring an IPv6 BIDIR-PIM domain border
Configuring global C-BSR parameters
Configuring C-BSR timers
Disabling BSM semantic fragmentation
Enabling IPv6 administrative scoping
Configuring an IPv6 admin-scoped zone
boundary
Configuring C-BSRs for each admin-scoped
zone
402
Remarks
Optional.
By default, the device switches to
the SPT immediately after it
receives the first IPv6 multicast
packet from the RPT.
Remarks
Required.
Required.
Use at least one
approach. In
an IPv6 network
only with a
static RP, skip
the task of
configuring a
BSR.
Optional.
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional