Power Cord - Weinmann VENTIlogic LS Instructions For Use Manual

Key
1 Device outlet port
The respiratory air flows to the patient from here
via the patient circuit and the patient/ventilator
interface.
2 O coupling
2
Serves as an adapter for connecting the oxygen
source to the therapy device.
3 Control panel and displays
For controlling and monitoring the therapy device
and connected accessories.
4 Handle
For transporting the device.

5 Power cord

For connecting the therapy device to the power
supply.
6 VENTIpower connection
For connecting the VENTIpower mobile power
supply available as an accessory.
7 Card reader
Slot for a Weinmann memory card. Therapy data
are stored on the memory card which the doctor
can call up.
8 Serial ports
For connecting devices for displaying and
evaluating therapy data.
6 EN
Overview
9 Filter compartment lid, air inlet
For covering and securely positioning the coarse
dust and fine filters.
10 Remote alarm connection
For connecting the hospital's internal nurse call
system or the VENTIremote alarm remote alarm
case for use outside the hospital.
11 Cable-securing clip
Prevents the device being disconnected from the
power supply inadvertently.
12 Power connection
This is where the power cord is connected to the
device.
13 Device ID plate (underneath)
Provides information about the device, such as
serial number and year of manufacture, for
example.
14 Oxygen connection
For connecting the oxygen supply if oxygen
supply has been prescribed.
15 Housing fan
Protects the device from overheating.