5.5 Adjust brightness
5.6 LIAM info
Note
A detailed explanation of the LIAM function can be found in the section entitled
"5.11 LIAM (insufflation)" on page 57.
54
EN
Operation
You can change the brightness of the display:
1. In the patient menu, select the Brightness menu item
using the dial.
2. Select the desired brightness level using the dial.
3. Confirm your selection by pressing the dial.
Tip
To switch off the display completely during therapy (at
night for example), press the dial during therapy. Switch
the display back on by pressing the dial again.
1. In the patient menu, use the dial to select the LIAM
info menu item.
2. Confirm your selection by pressing the dial.
You will find the following values and their residual
running times under LIAM info:
• Duration
• Interval
• Cycles
• Plateau signal (activated or deactivated)