Disposal - Weinmann VENTIlogic LS Instructions For Use Manual

or
• after 2 years (see service label on the rear of the device)
depending on which comes first.
The safety check and servicing include:
– check for completeness
– visual inspection for mechanical damage
– filter change
– cleaning the device
– replacement of any defective parts
– complete check of device functions and pressure displays
– battery change
– change of internal battery
– final check in accordance with test instruction WM 27104
– testing the power supply failure alarm

9.6 Disposal

9.6.1 Device
9.6.2 Internal battery
9.6.3 Oxygen sensor
Do not dispose of the device with domestic waste. To
dispose of the device properly, contact a licensed,
certified electronic scrap disposal merchant. This address
is available from your Environment Officer or from your
local authority.
Do not dispose of the internal battery with domestic
waste. To dispose of the battery properly, contact a
licensed, certified electronic scrap disposal merchant.
This address is available from your Environment Officer or
from your local authority.
Do not dispose of the oxygen sensor with domestic
waste, as it contains electrolyte and lead. It should be
disposed of in accordance with applicable national or
regional regulations.
Maintenance and safety checks
EN 95