Operation - Weinmann VENTIlogic LS Instructions For Use Manual

5. Operation

5.1 Controls
5.1.1 Function keys
4
1 2 3
After these keys are pressed, the corresponding menu appears in the display. You can
navigate within the menu using the dial (see "Navigating with the dial" on page 49).
The other functions (5) can only be operated by the doctor.
Menu key
Use the menu key to switch from Monitor to Menu.
Current values during therapy are displayed in Monitor. You can make settings to the
device in Menu.
The menu key has other functions (e.g. back) depending on context. The current function
is always displayed on the left of the display next to the menu key.
Of the functions in the patient menu, only the Calibrate O
ventilation mode. Drying process, Function check and Auto switch-on can only be
activated in standby mode. Alarm list and Filter change can be selected at any time.
Acknowledge alarm
Use the alarm acknowledgement key to acknowledge an acoustic alarm and mute it for
120 seconds.
48 EN
Operation
The following functions can be called up directly in
ventilation mode by pressing the relevant key on the
device.
• Activate softstart and set softstart time (1)
5
• Activate humidifier and set humidifier stage (only
leakage ventilation) (2)
• Acknowledge alarms (3)
• LIAM (insufflation) (4)
Note:
Softstart can only be activated in CPAP mode.
sensor function is available in
2