Weinmann VENTIlogic LS Instructions For Use Manual page 10

Therapy device, double patient circuit with patient valve (VENTIlogic LS
only)
35 Connection for pressure-
measurement tube
(marked blue)
34 Connection for O
47 Pressure-
measurement tube
(marked blue)
46 Connection for
device outlet port
45 Valve control
tube
44 Connection for
device inlet port
34 Connection for O
For connecting an oxygen sensor which can be
used to measure oxygen concentration in
respiratory air (only with patient circuits with a
patient valve).
35 Connection for pressure-
measurement tube (marked blue)
For connecting the pressure measuring tube to
the device.
39 Opening for exhaled air
This is where the patient's exhaled air is routed
10 EN
Overview
sensor
2
40 Double patient circuit
43 Patient valve
sensor
2
36 Test adapter
39 Opening for
38 Device connection for
exhaled air
41 Connection
42 Y-adapter
36 Test adapter
Required for the function check of the therapy
device.
37 Connection for valve control tube
For connecting the valve control tube to the
device.
38 Device connection for patient valve
For connecting the patient valve to the device
inlet port of the therapy device.
out of the device.
37 Connection for
valve control tube
patient valve
for patient