Table of Contents
Advertisement
SMTP
1
Select Setup on the GUI banner to display the setup menus.
2
Select SMTP from the Network menu.
The SMTP tab displays.
3
Select Test.
A sample email will be sent to the specified email address to confirm that SMTP settings are correct.
SNMP
The camera introduces support for the Simple Network Management Protocol making it easier to manage on an IP
network.
The SNMP support includes support for V2 and V3. Using V2 means no authentication is required to access the
data and results are unencrypted. V3 offers enhanced encryption and authentication security features.
Procedure 8-8 Configure SNMP Settings
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select SNMP from the Network menu.
3
Enter a location reference in the Location text box.
4
Enter an SNMP managing contact reference in the Contact text box.
5
If using V2:
a
Select the Enable V2 check box.
b
Enter the authorized ID for reading SNMP data in the Read Community text box.
c
Enter the Trap Community.
d
Enter the Trap Address.
e
Select Apply.
OR
If using V3:
a
Select the EnableV3 check box.
b
Enter the Read User.
c
Select the Security Level from the drop down menu:
- noauth: No authentication / no encryption.
- auth: Authentication / no encryption. A user password is required. It is symmetrically encrypted
using either MD5 or SHA.
- priv: Authentication / encryption. A user password is required, symmetrically encrypted using
either MD5 or SHA. A data encryption password is required, symmetrically encrypted using either
DES or AES.
d
Select the Authentication Type using the radio buttons: MD5 or SHA.
e
Enter the Authentication Password
f
Select the EncryptionType using the radio buttons: DES or AES.
g
Enter the Encryption Password
99
- End -
Hide quick links:
Advertisement
Table of Contents
