Illustra Pro PTZ 30x Configuration User Manual page 80

Security Status
Note:
Any changes in the Security section, either changes to the Security Mode or individual protocol, are logged in the
Security Log.
Enhanced Security
Admin users may change the Security Mode of the camera from Standard Security to Enhanced Security.
Procedure 7-1 Enable Enhanced Security
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Security Status from the Security menu.
3 Select the Security Overview tab.
4 Select the Enable Enhanced Security check box to enable this option.
OR
Deselect the Enable check box to disable enhanced security.
The default setting is 'Disabled'.
The Security Warning dialog box displays.
5 Enter the current password in the Current Password text box.
6 Enter the new password in the New Password text box.
Note:
The password for enhanced security must meet the following requirements:
• Be a minimum of seven characters long.
• Have at least one character from at least three of the following character groups:
7 Reenter the new password in the Confirm Password text box.
8 Click Apply.
Note:
Any changes to the Security Mode are logged in the Security Log.
80
• Upper-case letters
• Lower-case letters
• Numeric characters
• Special characters
- End -