Table of Contents
Advertisement
Users
Note:
The default Username and Password are both admin. To maintain security, you should change the password on
the admin account.
View Current User Accounts
View a list of the current user accounts assigned to the camera.
Procedure 7-6 View User Accounts
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Users from the Security menu.
The current user accounts assigned to the camera will be displayed on the User tab.
Add User
Add a new user account to allow access to the camera.
Procedure 7-7 Add a User
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Users from the Security menu.
3
Select the Add User tab.
4
Enter a User Name in the Name text box.
The username must start with a letter and can be followed by any alphanumeric values (a-z, A-Z, 0-9) and
the following special characters, underscore(_), dash(-), or dot(.)
5
Select a Role from the drop-down menu:
• admin
• operator
• user
The default setting is 'admin'.
Refer to
6
Enter a password in the Password text box.
The password must start with an alphanumeric character and is case sensitive; it can contain
alphanumeric characters with a length of between 4 and 32 characters.
Note:
When the system is in enhanced security mode, the password must meet the following requirements:
Illustra Pro PTZ Configuration & User Guide
Appendix C: User Account Access
- End -
on
Page 135
for features available to each role.
83
Hide quick links:
Advertisement
Table of Contents
