Table of Contents
Advertisement
Event Logs
• Avoid areas with persistent motion, such as trees, blinking lights, or spinning signs, by using an
appropriate region of interest. For scenes like these it is recommended to lower the motion sensitivity
level.
Enable or Disable a Motion Detection Alert
Motion detection can be turned on and turned off when required.
Procedure 5-14 Enable or Disable a Motion Detection Alert
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Analytics from the Events and Actions menu.
3
Select the Motion Detection tab.
4
Select the Enable motion detection check box to enable Motion Detection on the camera.
OR
Deselect the Enable motion detection check box to disable Motion Detection on the camera.
5
Select the sensitivity from the Sensitivity drop-down menu:
• Highest
• High
• Medium
• Low
• Lowest
The default setting is 'High'.
6
Select the fault (Event) action from the Action drop-down menu.
This Event action will be activated when motion is detected in the field of view.
See
Create an Event Action
7
Select Apply to save the configuration.
Event Logs
Event Log
When events are triggered the resulting alarms are displayed in the Event Log with the following information:
• # - details the event index.
• Event - this will be listed as 'MotionDetected'.
• Date created - the time and date when the motion detection was triggered.
Illustra Pro PTZ Configuration & User Guide
on
Page
64if a fault action has not yet been defined.
- End -
68
Hide quick links:
Advertisement
Table of Contents
