Table of Contents
Advertisement
Preset
2
Select Preset from the PTZ menu.
The Preset tab displays.
3
Select
The video pane will display the current camera view.
4
Select
The video pane will update to display the selected preset.
5
Select
6
Edit the preset name in the Preset Name text box if required.
7
Adjust the camera view as required.
• Pan, Tilt and Zoom.
• Focus Mode and Iris Mode.
Refer to
8
The following camera controls can be saved as part of the preset and accessed via the Picture Settings
menu:
• White Balance
• Picture Balance
• Wide Dynamic Range (WDR)
• IR/DayNight
• Shutter Limit
9
Select Add to save the updated preset.
You will be prompted to confirm the update.
10
Select OK to save the changes.
OR
Select Cancel.
Deleting a Preset
Delete an existing preset position from the camera.
Procedure 4-11 Delete a Preset
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Preset from the PTZ menu.
The Preset tab displays.
3
Select
You will be prompted to confirm the deletion.
Illustra Pro PTZ Configuration & User Guide
to start the video stream if it is not already active.
to activate the corresponding preset.
to edit the corresponding preset.
Using the Camera Controls
to delete the corresponding preset.
on
Page 5
to make the necessary adjustments.
45
Hide quick links:
Advertisement
Table of Contents
