Preset
The default is None.
If an action is selected, chose the type of action to perform from the Parameter drop-down menu that is
enabled.
4
Use the slider bar to select the Return Time (mins).
The default is 5.
5
Select Apply to save the settings.
Procedure 4-7 Clear the Home Position
Step Action
6
Select Setup on the GUI banner to display the setup menus.
7
Select PTZ Parameters from the PTZ Settings menu.
Select the Home tab.
8
Select None from Home Position Type.
9
Select Apply to save the settings.
Preset
A Preset is a pre-positioned camera scene that you program using the pan, tilt and zoom options. Up to 96 presets
can be programmed on the camera.
Adding a new Preset
Create a new preset position on the camera.
Procedure 4-8 Add a Preset
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Presets from the PTZ menu.
The Preset tab displays.
3
Select
The video pane will display the current camera view.
4
Adjust the camera view as required.
• Pan, Tilt and Zoom.
• Focus Mode and Iris Mode.
Refer to
Illustra Pro PTZ Configuration & User Guide
to start the video stream if it is not already active.
Using the Camera Controls
- End -
- End -
on
Page 5
to make the necessary adjustments.
43