Illustra Pro PTZ 30x Configuration User Manual page 126

Base Protocol and Underlying Layers
Ceiling
Surface Mount
without
Bubble
Diameter
154mm (6.06in)
Total
178mm (7.01in)
Height
Height
Below
191mm (7.52in)
Ceiling
Environmental
Operating Temperature
Humidity
Storage Temperature
Regulatory
Emissions
Immunity
Safety
Environmental
Base Protocol and Underlying Layers
• The camera is an IP camera compatible with TCP/IP protocol.
• The camera supports both IPv4 and IPv6, running either in single stack mode or dual stack mode
(supporting both IP versions at the same time).
• TCP is used for two way communication and UDP will be used for broadcasting protocols.
Illustra Pro PTZ Configuration & User Guide
Ceiling
Surface
Mount with
Bubble
210mm
(8.27in)
213mm
(8.39in)
213mm
(8.39in)
Specification
Indoor:-10°C to 50°C (14°F to 122°F)
Outdoor:-40°C to 50°C (-40°F to 122°F)
95% non-condensing
-20°C to 65°C (-4°F to 149°F)
Specification
FCC: Part 15 Class A
CE: EN55022 Class A
AS/NZS CISPR 22 Class A
ICES-003/NMB-003 Class A
CE: EN50130-4
CE: EN55024
CE: EN61000-6-1
UL 60950-1
CSA-C22.2 No. 60950
CE EN60950-1
Outdoor: UL 50 (Type 4)
Outdoor: EN60529 (IP66)
RoHS
Recessed Recessed
Ceiling Mount Ceiling Mount
without Bubble with Bubble
180mm (7.09in) 245mm (9.65in)
(body) (flange)
280mm
165mm (6.50in)
(11.02in)
5mm (0.20in) 116mm (4.57in)
Details
Details
Outdoor
Indoor
with
Pendant
Bubble
Mount with
and Sun
Bubble
shade
257mm
257mm (10.12)
(10.12)
372mm
320mm (12.60)
(14.65)
NA NA
126