SMTP
File Transfer Rate
The File Transfer Rate can be limited and a max transfer rate assigned to manage the amount of FTP bandwidth
used.
Procedure 8-4 Configure the FTP Transfer Rate
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select FTP from the Network menu.
3
Select the Limit Transfer Rate check box to limit the FTP transfer rate.
OR
Deselect the Limit Tranfer Rate check box to disable limited FTP transfer.
The default setting is 'Enabled'.
4
Enter the Max Transfer Rate in the Max Transfer Rate (Kbps) textbox.
The default setting is 50.
Test FTP Settings
Test that the settings set in
Procedure 8-5 Test the FTP Settings
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select FTP from the Network menu.
The FTP tab displays.
3
Select Test.
A sample text file will be sent to the specified FTP destination to confirm that FTP settings are correct.
SMTP
Configure the SMTP settings to allow e-mail alerts to be sent from the camera when an alarm or analytic alert is
triggered.
Note:
SMTP settings must be configured to enable email alerts when using alarms and analytic alerts. SMTP can also
be configured via the Events and Actions menu. Refer to
Procedure 8-6 Configure SMTP Settings
97
Configure FTP Server Settings
- End -
on
Page 96
have been configured correctly.
- End -
SMTP
on
Page
59.