Table of Contents
Advertisement
About
1
Select Setup on the GUI banner to display the setup menus.
2
Select Logs from the System menu.
3
Select the Audit Log tab.
4
Select Refresh to refresh the log for the most up-to-date information.
Procedure 9-20 Filter the Audit Log
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Logs from the System menu.
3
Select the Audit Log tab.
4
Select the search by criteria by selecting a radio button:
• text
• date
The default is text.
a
If you selected text, enter the word or phrase that you would like to search for in the Filter Text 1)
text box, select an AND/OR operator from the drop-down menu and then select the word or phrase
that you would like to search for in the Filter Text 2) text box.
b
If you selected date, enter a Start date and an End date in the format DD/MM.
5
Select Refresh to refresh the log for the most up-to-date information that meets the filter parameters.
About
The About menu provides the following camera information:
• Camera Name
• Model
• Product Code
• Manufacturing Date
• Serial Number
• MAC Address
• Firmware Version
• Hardware Version
• iAPI Version
Procedure 9-21 Display Model Information
114
- End -
- End -
Hide quick links:
Advertisement
Table of Contents
