Illustra Pro PTZ 30x Configuration User Manual page 52

Sequences
6 Enter a dwell time in seconds in the Dwell Time (sec) text box.
The settings are 5-500.
7 Select Add.
The preset is now listed as part of the sequence.
8 Repeat steps 5 to 7 to add further presets to the sequence.
Note:
Up to 16 presets can be added to a sequence.
9 Select Apply to save the sequence.
Activating a Sequence
Activate a selected sequence.
Procedure 4-21 Activate a Sequence
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Sequences from the PTZ menu.
The Sequences tab displays.
3 Select
The video pane will display the current camera view.
4 Select
The video pane will update to display the selected sequence.The sequence will run continuously until
interrupted by a camera command, pattern, preset, scan or alarm.
Editing a Sequence
Edit an existing sequence.
Procedure 4-22 Edit a Sequence
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Sequences from the PTZ menu.
The Sequences tab displays.
52
to start the video stream if it is not already active.
to activate the corresponding sequence.
- End -
- End -