Illustra Pro PTZ 30x Configuration User Manual page 12

Video Stream Settings
6 Use the slider bar to select the Frame Rate (fps).
The settings are:
• Stream 1 - 1 - 30 fps, default 30.
• Stream 2 - 1 - 30 fps, default 30.
The settings are 1-30, default 30.
7 If MJPEG has been selected, MJPEG Quality will be enabled. Use the slider bar to select the MJPEG
Quality.
The default setting is 50%.
MJPEG has a higher bandwidth requirement than H264; the following provides a recommendation for
quality settings when using MJPEG:
• Maximum possible Quality setting: 100
• Recommended Maximum setting: 90
• Recommended High Quality setting: 75
• Recommended Medium Quality setting: 55
For high resolution we recommend the following reduced limits:
OR
8 If H264 has been selected in step 4, Rate Control will be enabled. Select the required Rate Control by
selecting the radio buttons:
• VBR (Variable Bit Rate)
• CBR (Constant Bit Rate)
The default setting is 'VBR'.
a If VBR has been selected, VBR Quality will be enabled. Select the required VBR Quality from the
drop-down menu.
12
Resolution FPS
1920x1080 30
1920x1080 15
1920x1080 7
1600x900 30
1600x900 15
1600x900 7
1280x720 30
1280x720 15
1280x720 7
• Highest
• High
• Medium
Recommended Maximum Quality
60
70
80
65
75
85
70
80
90