Table of Contents
Advertisement
FTP
2
Select Event Settings from the Events and Actions menu.
3
Select the FTP tab.
4
Select Test.
A sample text file will be sent to the specified FTP destination to confirm that FTP settings are correct.
CIFS
Configure the CIFS settings to allow files generated from the camera to be directed to network attached file
storage via the Common Internet File System (CIFS) protocol. This supplements existing distribution methods
such as FTP, SMTP, and email.
Note:
CIFS settings can also be configured via the Network menu. Refer to
Procedure 5-6 Configure CIFS Settings
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Event Settings from the Events and Actions menu.
3
Select the CIFS tab.
4
Select the Enable CIFS check box to enable CIFS.
Text boxes on the tab become available for entry.
OR
Deselect the Enable check box to disable CIFS.
The default setting is 'Enabled'.
Note:
When in Enhanced Security mode, enabling CIFS will require the admin account password.
5
Enter the network path in the Network Path text box.
6
Enter the domain name in the Domain Name text box.
7
Enter the username in the Username text box.
8
Enter the password in the Password text box.
9
Select Apply to save the settings.
Note:
Refer to
Illustra Pro PTZ Configuration & User Guide
Test CIFS Settings
on
Page 63
- End -
CIFS
to confirm that the CIFS settings are working as expected.
- End -
on
Page 100
62
Hide quick links:
Advertisement
Table of Contents
