Table of Contents
Advertisement
FTP
The default setting is 'Disabled'.
6
Enter the IP address of the FTP Server in the FTP Server text box.
7
Enter the FTP port in the FTP Port text box.
The default setting is 21.
8
Enter the FTP username in the Username text box.
9
Enter the FTP password in the Password text box.
10
Enter the FTP upload path in the Upload Path text box.
Note:
When entering the upload path the following format should be used '//<name of ftp directory>/<folder>'
Note:
Refer to
File Transfer Rate
The File Transfer Rate can be limited and a max transfer rate assigned to manage the amount of FTP bandwidth
used.
Procedure 5-4 Configure the FTP Transfer Rate
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select FTP from the Network menu.
3
Select the Limit Transfer Rate check box to limit the FTP transfer rate.
OR
Deselect the Limit Tranfer Rate check box to disable limited FTP transfer.
The default setting is 'Enabled'.
4
Enter the Max Transfer Rate in the Max Transfer Rate (Kbps) text box.
The default setting is 50.
Test FTP Settings
Test that the settings set in
Procedure 5-5 Test the FTP Settings
Step Action
1
Select Setup on the GUI banner to display the setup menus.
61
Test FTP Settings
on
Page 61
Configure FTP Server Settings
to confirm that the FTP settings are working as expected.
- End -
- End -
on
Page 60
have been configured correctly.
Hide quick links:
Advertisement
Table of Contents
