Illustra Pro PTZ 30x Configuration User Manual page 42

Table of Contents

Advertisement

PTZ Parameters
Zoom Stops
The Zoom Stops define how the digital zoom function is partitioned.
Note:
The Zoom Stop will not be used if EIS is enabled.
For example the Illustra Pro PTZ 30X Dome has a 30x optical zoom with a 12X digital zoom allowing a maximum
possible zoom of 360X. The camera default setting for the First Stop is 45X and 120X for the Max stop. If the
current zoom level is less than 45X, pressing Zoom In continuously causes the zoom to stop at 45X. If the zoom
level is 45X or greater, pressing Zoom In continuously causes the zoom to stop at the maximum setting of 120X.
The second zoom stop remains in effect until the zoom function is reduced to less than the first zoom stop setting
(45X) and the zoom button is released for one second or longer. To achieve higher zoom levels, change the
maximum zoom setting.
Procedure 4-5 Setting the Zoom Stops
Step     Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select PTZ Parameters from the PTZ Settings menu.
3
In the Zoom Stops section use the slider to change the First Zoom Stop setting. The slider bar can be
moved left or right using the mouse or for fine adjustments using the left and right arrow keys on the PC
keyboard. The default first stop zoom setting is 45X.
4
Use the slider to change the Max Total Zoom X setting. The Max Zoom setting should always be higher
than the First Zoom setting. The maximum zoom setting is 360X.
Home
Home allows you to adjust the Home Position Type. The home position is a preset, pattern or scan/sequence that
automatically runs after a designated period of camera inactivity. Use this option if you want to keep a specific
area under surveillance when the camera is not moving or to resume an Intelligent Guard Tour.
Procedure 4-6 Configure the Home Position
Step     Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select PTZ Parameters from the PTZ Settings menu.
Select the Home tab.
3
Select the Home Position Type:
• Preset
• Pattern
• Sequence
• Scan
• None
42
- End -

Advertisement

Table of Contents
loading

Table of Contents